Sabtu, 04 Agustus 2012

U-boot and Nitdroid for n900 [Camera fixed, Network Working!!!]

Ok this is a short guide for more andvanced users:
1. Download Nitdroid 2.3.4 N12_Umay and install it on ext3/ext4 partition (mmcblk1p2) - for ext4 kernel support use the second link!
2. Your first sd card partition should be FAT (for ext2/ext3 and etc will explain tomorrow)
3. Install U-boot by Pali:
Update: 28.04.2012 11:50 UTC: Fixed problem with mkimage, build error in debian/rules and correct ram size in u-boot rx51 board code
Update: 28.04.2012 17:50 UTC: Fixed and enabled SW cursor. Now problem with damaged video output is fixed.
Update: 09.07.2012 08:10 UTC: New version which generate omap atag
Update: 09.07.2012 15:46 UTC: Set bootdealy to 0 if keyboard is closed

Update: New version 2012.04-2
Changes:
* load bootmenu.src always (if keyboard is closed, first menu entry will be automatically boot)
* u-boot now NOT reusing omap atag, instead it generate it
* item option ITEM_REUSEATAGS is obsolated (but still working). Now use ITEM_OMAPATAG for booting Maemo 5
* u-boot variable atagaddr is now ignored, because u-boot is not reusing atags.
* u-boot command "setenv setup_omap_atag 1" will tell u-boot to generate omap atag for booting kernel PLEASE DO NOT USE IT - INSTEAD USE ITEM CONFIG FILE

Update: New version 2012.04
Visible changes for users:
* atag address for kernel is always 0x80000100, so for reusing atags from nolo is needed this command: "setenv atagaddr 0x80000100" instead "setenv atagaddr ${init_atagaddr}"PLEASE DO NOT WRITE YOUR OWN SCRIPTS - USE ITEM CONFIG FILES
* for reusing atags u-boot-update-bootmenu needs option ITEM_REUSEATAGS=1 (instead ITEM_USEATAG) - but works also old option (it show warning) - update your item config files
* "run noloboot" command renamed to "run attachboot"
* if you are not reusing atags from nolo, u-boot will generate memory atag which is needed to boot kernels (now maybe meego/upstream kernel will boot without nolo atags)

other changes:
* added ext4 support
* added console history support (but without cursor)
* disabled cursor - it is buggy now
* enabled generating memory atag
* restored powerbus state after enabling eMMC
* removed init_atagaddr variable (it must be always 0x80000100)
* fixed keymap, cursor keys
* ...


Das U-Boot is bootloader which can boot kernel image with initrd. It can be used for booting more kernels (Nokia stock, kernel-power, ...) or for booting other systems (Nemo, Nitdroid, Kubuntu, Debian, ...).

This U-Boot version is new and has nice Bootmenu (like Fanoush Bootmenu or Multiboot packages). I'm working on upstreaming U-Boot RX-51 (N900) port and this U-Boot Bootmenu. This version should be stable, it has FIXED battery draining and video output garbage.

U-Boot Bootmenu reading special config file and some images from MyDocs (file bootmenu.scr and directory bootmenu-img.d). This special u-boot config file is binary and is generated from text config files by script u-boot-update-bootmenu

New U-Boot has 3 packages:

u-boot-bootimg - contains only u-boot binary, nothing more (it is not need for end-users)

u-boot-tools - contains tools:
* u-boot-gen-combined - generate combined images (u-boot with kernel)
* u-boot-update-bootmenu - update bootmenu entries for U-Boot
* mkimage - convert zImage kernel format to uImage (U-Boot format)

u-boot-flasher - contains combined image: u-boot binary with stock PR1.3 kernel. After installation is this image flashed, and replace actual kernel. This package depends on u-boot-tools!

Download & Install (in this order)
http://atrey.karlin.mff.cuni.cz/~pal...04-2_armel.deb
http://atrey.karlin.mff.cuni.cz/~pal...04-2_armel.deb

!BEFORE INSTALLING PACKAGES ALL OTHER/OLD U-BOOT VERSIONS MUST BE UNINSTALLED!
!INSTALLING u-boot-flasher PACKAGE WILL REPLACE YOUR KERNEL IN NAND!


Source code:
Full source code with debian control files are in branch pali on gitorious project u-boot-shr: https://gitorious.org/u-boot-shr/u-boot/commits/pali

How to create bootmenu entry for U-Boot:
copy kernel image zImage-my to /boot/
create config file in /etc/bootmenu.d/ with suffix .item

/etc/bootmenu.d/20-my-kernel.item

Code:
ITEM_NAME="My kernel"   # Menu entry name
ITEM_KERNEL="zImage-my" # file name stored in /boot/
ITEM_OMAPATAG=1         # This is needed for booting Maemo
Warning: ITEM_USEATAG and ITEM_REUSEATAGS options was renamed to ITEM_OMAPATAG

Set bootmenu item file as default first entry
Create symlink to /etc/default/bootmenu.item from your item file. For example:
$ ln -s /etc/bootmenu.d/20-Maemo5-kernel-power-2.6.28.10-power51.item /etc/default/bootmenu.item

Item config file has same format as Fanoush bootmenu and is stored in same folder (Multiboot package has same format too, but in folder /etc/multiboot.d/)

After creating config run tool u-boot-update-bootmenu. u-boot-update-bootmenu must be called every time, when config file is changed.

See also u-boot-images.tar.gz which contains example item files.

How to easy create Maemo kernel dualbooting: Stock PR1.3 kernel, kernel-power and other...

Just copy zImages to /boot, create config files for each and run u-boot-update-bootmenu

kernel-power v50 has package kernel-power-bootimg in extras-devel & extras-testing. It contains proper zImage and item file.

Examples:

This tarball http://atrey.karlin.mff.cuni.cz/~pal...12.04-1.tar.gz contains some kernels (stock PR1.3 and stock PR1.3 with framebuffer) and some item files.

For playing & testing download archive to / and unpack it as root:
$ cd / && tar -xf u-boot-images.tar.gz

Do not forget to update bootmenu:
$ u-boot-update-bootmenu

Screenshot:
Attached Images

4. Download nitdroid rc7 kernel and extract the file - then go to /system/lib/modules/2.6.28.NIT.07/  and copy all the files to  /system/lib/modules/current in NITDROID partition (mmcblk1p2)
4.1. Replace init.nokia.rc with mine
5. Now download boot.scr from attachments and copy it to the first partition (FAT)
6. Dowload uImage and copy it to the same place as boot.scr
7. Insert sd card in n900 and power on with opened keeyboard
8. Stop u-boot counting and enter U-boot console
9. Write - run sdboot... and watch booting

Bluetooth, Wi-fi, charging, hardware acceleration, lights and other things NOW working!!!  Just replace init_subsys in /system/maemo/bin

P.S. If using boot.scr from the archive below it will stop for 10 seconds to wait for rootfs to be mounted! If these steps are not convenient for you read the text below to find out how to configure your own boot.scr

Credits: E-yes (For help and Nitdroid), Pali (for help and U-boot), Marex_ (at #u-boot at freenode) for help and Vakkov for making it possible. and everybody else who i have forgot about.

FILES: http://www.mediafire.com/?lu5hq6rinitce5e
Kernel only(with ext4 support): http://www.mediafire.com/?0v7ed0jzp6zcqb0


- I want to boot Nitdroid from a partition different from mmcblk1p2 (second partiton of sd card). How to do it?
- Here is how to:
nit.src is the "source" file of boot.src. You can open it with a text editor and see its contents
Change "root=/dev/mmcblk1p2" to your desired partition (where Nitdroid is stored) - for example /dev/mmcblk0p2 (that's eMMC).
rootdelay=10 is the time in seconds to wait for the rootfs to be mounted before continuing with loading the kernel. You can set it to 1 if you want or you can replace the whole rootdelay parameter with rootwait (it will wait for the file system to mount and then continue). FOR EXT4 USE THE KERNEL FROM THE SECOND LINK!

- I want to place the kernel (uImage) wherever I want. How to do it?
Go on the second line of nit.scr (starts with setenv bootcmd) i Used fatload mmc 1:1 This means it will search for the uImage at the first partition of the sd card and that partition has to be a FAT one.
The format of this can be:
Code: [Select]
fatload mmc <device>:<partition number> 0x82000000 <filepath/file>
ext2load mmc <device>:<partition number> 0x82000000 <filepath/file>
So if you want to use an ext2/ext3 partition to store the kernel use ext2load (yes, it's also loading ext3)

Generating boot.scr
When you finish editing nit.scr to your desired settings save it and run in terminal:
Code: [Select]
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "NITDroid" -d nit.scr boot.scr
This will generate a valid boot.scr which you have to copy to the FIRST partition of sd card or to boot.scr

New init.nokia.rc and camd - Camera FIXED! Works on N12_UMay (2.3.4) with 2.3.7 camera libs, should also work on 2.3.7
P.s. Replace camd in system/maemo/bin (where init_subsys is stored)

Soon - bootmenu guide!
* nit.scr (0.26 kB - downloaded 401 times.)
* init_subsys (1.95 kB - downloaded 423 times.)
* init.nokia.rc (7.86 kB - downloaded 328 times.)
* camd (0.21 kB - downloaded 376 times.)

New [MOD] Update NITDroid N13


Download in  Here
what new fix :
1. camera
2. sound
3. USB

new :
1. Launcher ICS
2. Icon ICS
3.bootanimation MOKEE
4.filemanager
5.etc

 SCREENSHOOT :D

 












 

















 Thanks to : e-yes
                   : ammyt  
                   ersan permana

Jumat, 29 Juni 2012

CPU Power Control by ammyt

Installs dynamic-CPU scaling patch, a range of other battery enhancements, and provides a full Kernel-Power control centre.


CPU Power Control for Nokia N900 / 
Maemo 5


The patch Dynamic CPU Scaling requires a profile to load when the device is active, so you can use either one of the prebuilt profiles, your profiles, or build a new one at the spot.


CPU Power Control for Nokia N900 / 
Maemo 5


Preloaded profiles are saved in /usr/share/kernel-power-settings/reg

User built profiles are in /usr/share/kernel-power-settings/userbuilt


CPU Power Control for Nokia N900 / 
Maemo 5


CPU Power Control for Nokia N900 / 
Maemo 5





































What are repositories, how to use them?



Repositories are catalogs on Internet servers containing software you can download for your device.

In order to be able to use a repository, you need to add it to the Application Manager of your Maemo phone. Launch Application Manager and select "Software catalogues" from the pull-down menu. You will see a list of already configured repositories and a "New" button to add a new one.

To add a new repository, you have to enter its name (whatever you like), URL (web address), distribution (should be "fremantle" in case of Maemo 5), and components (which vary depending on repository so you'll need to check it; it's usually "free non-free" but there are also custom ones).

Once you add the new repository, application list under the "Download" button of the App Manager will be refreshed and apps available in the newly added catalog will be listed. Now you can just tap them to install them in your device. You will also be notified about any updates available for installed applications.

Minggu, 18 Maret 2012

Install Android GingerBread 2.3.7 Tanpa Koneksi Internet di Nokia N900

metode ini akan memformat sdcard... bakcup dulu data agan di sdcard :)
sebelum menginstall nitdroid secara manual, pastikan agan bisa melakukan flashing kernel & lebih baik agan coba install nitdroid   dgn auto installler dulu...
download nitdroid auto installer 0288 di sini
install dan jalankan... (konek inet)
karena ada rover yg compatible dan ga compatible dgn auto installer ini maka siapin jg bahan bwt flash kernel..



cara auto installer ni wajib sbelum mencoba install manual sperti tutor dibawah !!!

kalau memang gagal pakai auto installer baru coba cara manual :)


Kalo agan pernah install nitdroid dengan auto installer agan tidak perlu uninstall nitdroidnya..
cukup hapus folder /and dengan filebox.

1. Download bahan ini dan taruh  di folder N900 / MyDocs :

gingerbread
"extract di mydocs, buka folder nokia7vista, cut file 3.deb, 6.deb 7.deb paste ke MyDocs"

N12_Umay.tar.bz2

N12_update_2.3.7.tar.bz2


2. buka xterminal baru ketik :

"ane sarankan copas ja gan, takut salah cmd.. hehe"

Quote:
root
cd /home/user/MyDocs/Nokia7Vista
dpkg -i *.deb
umount /dev/mmcblk1p1

=================================================
kalo sdcard agan 4 GB Memory, execute:
-----------------------------------
sfdisk -uM /dev/mmcblk1 << EOF
,2100,C
,,L
,,
,,
EOF
=================================================
kalo sdcard agan 8 GB Memory, execute:
-----------------------------------
sfdisk -uM /dev/mmcblk1 << EOF
,6100,C
,,L
,,
,,
EOF
=================================================
kalo sdcard agan16 GB Memory, execute:
-----------------------------------
sfdisk -uM /dev/mmcblk1 << EOF
,14100,C
,,L
,,
,,
EOF
=================================================

"kalo kluar error abaikan saja, lanjut trus"


lanjut ketik :

umount /dev/mmcblk1p1
mkfs.vfat /dev/mmcblk1p1 -n sdcard
mke2fs -j -m0 -L Android /dev/mmcblk1p2
cd /
mkdir /and
mount /dev/mmcblk1p2 /and
cd /and
tar xvf /home/user/MyDocs/Nokia7Vista/ginger.tar
dpkg -i /home/user/MyDocs/Nokia7Vista/after/NITDroid-kernel.deb
    sudah selesai install, reboot dengan keyboard tertutup...!!! jangan masuk ke nitdroid dulu... sabar gan...hehe


connect inet untuk cek kekurangan package & cek versi yg compatible,
masuk xterminal lg, ketik :
Quote:
sudo gainroot
apt-get upgrade
apt-get -f install
jika tidak ada perubahan berarti tinggal lanjut step berikutnya, close xterminal.

buka xterminal baru ketik :

root
cd /home/user/MyDocs
bzip2 -d N12_UMay.tar.bz2
bzip2 -d N12_update_2.3.7.tar.bz2
cd /home
mkdir /and
cd /
mount /home /and
cd /and
tar xvf /home/user/MyDocs/N12_UMay.tar
tar xvf /home/user/MyDocs/N12_update_2.3.7.tar
dpkg -i /home/user/MyDocs/Nokia7Vista/after/NITDroid-kernel.deb

close xterminalnya, buka filebox... 
( pastikan setingan filebox agan pada text editor adalah leafpad, dan enable root acces di centang )


buka folder /etc/multiboot.d/  tekan dan tahan file
   11-NITDroid-mmcblk0p2-2.6.28.NIT.06.item

pilih edit...
edit item devicenya saja !! jadi seperti ini   
ITEM_DEVICE=mmcblk1p2

 udah selesai save leafpadnya..

masuk ke folder /and pakai filebox

edit file default.prop pakai leafpad lg..

edit :
persist.swap.swappiness=0  menjadi persist.swap.swappiness=1

udah selesai save leafpadnya..

masuk ke folder /and/system/  masih pakai filebox..

edit file build.prop...

tambahkan text ini ( pada garis paling bawah )...

 dalvik.vm.heapsize=32m


save leafpadnya...

pada gingerbread 2.3.7 ada gangguan pada sound..
solusinya, extract pakai filebox  n12_umay 2.3.4.tar masukan pada folder baru aja gan biar ga ribet...
atau pakai pc lebih mudah...
udah extract.....

misal agan buat folder baru dengan nama 234 di MyDocs...
berarti agan harus cari file libasound.so & libaudio.so  nya di folder /home/user/MyDocs/234/system/lib/  (2 file itu ada disini.)
kemudian copy 2 file tersebut pakai filbox ke folder /home/system/lib/  taruh disini. overwrite atau replace aja...


paham kan gan... ni udah ane buat paling lengkap & mudah dipahami... :D


selesai

###########################################################################
############################################....

REBOOT N900 KEYBOARD
TERBUKA
PILIH NITdroid_06_on mmcblk0p2

Senin, 19 Desember 2011

GAME WEBOS N900

 post by pedro coba coba

sebelum install game webos wajib install preenv
masuk xterminal posisi online dgn asumsi sudah install rootsh & wget
ketik :
sudo gainroot
apt-get install preenv

.sh files for keyboard fixes etc very important !! http://www.mediafire.com/?h7vvck3lrccf1

Crusade of Destiny - http://www.mediafire.com/?4g77gvb10kq31rx

Bubblebash - http://www.mediafire.com/?vk56y1c6dc0t6h3

Tiger Woods PGA Tour Golf - http://www.mediafire.com/?8xo7wdobub08vbt

speedforge - http://www.mediafire.com/?uhu96dlo81z4v09

skater nation - http://www.mediafire.com/?87ot8w68z9qttbd

angrybirds seasons 1.30 st patricks day - http://www.mediafire.com/?sryo3yv5p2q8f7u

angrybirds seasons 1.20 valentines - http://www.mediafire.com/?4f68nr1xq9o0uff

angrybirds 1.51 - http://www.mediafire.com/?h4ttrtn4btalfku

Sudoku - http://www.mediafire.com/?f9cc6cz91ulo4bd

Mini Golf Wacky Worlds - http://www.mediafire.com/?g3dk8x2z36l1bpa

Real Soccer 2010 - http://www.mediafire.com/?1a7rddohkq23veo

Transformers G1: Awakening - http://www.mediafire.com/?obpf4rjj5vfk3j7#1

Giant Fighting Robots - http://www.mediafire.com/?aoxhk9p0qcrz1ab

X-Plane Airliner - http://www.mediafire.com/?qy1yfufw8dkx9q3

X-Plane Carrier - http://www.mediafire.com/?fuxkoaipeczkrzo

X-Plane Glider - http://www.mediafire.com/?npoz7hu33z8zqtt

X-Plane Racing - http://www.mediafire.com/?7pjr2lnfc334ih6

X-Plane Shuttle - http://www.mediafire.com/?iqeigui0y9kvqsy

NFL 2010 - http://www.mediafire.com/?882w9l88tcd81h2

Buka - http://www.mediafire.com/?2e2ko2p5ihejlws

Raging thunder 2 - http://uploaded.to/file/gza2fk

Deer Hunter 3D http://www.mediafire.com/?ljsjwxb6pirj2wy

Super KO Boxing http://www.mediafire.com/?wy7jwxfe328t15n#1

Guitar Hero 5 http://www.mediafire.com/?1r8rhqo5a5yqd6c

Jump oclock http://www.mediafire.com/?64z5sdyn09wo9ty

Toon Warz http://www.mediafire.com/?f3b3d8nb7hc8bo8

Uno http://www.mediafire.com/?ssqmxcn6c4jp0kx

FIFA10 http://www.mediafire.com/?3jjlr3ju5918uz8

How to train your dragon http://www.mediafire.com/?b90c1f8pxozl4oh

NFSU http://www.mediafire.com/?arw9tndduleufyy

H.O.S http://www.mediafire.com/?urjsa7c09sbaair

ASSASSINS CREED http://www.mediafire.com/?9yc95d54mhcd5za

NOVA http://www.mediafire.com/?cdp22bqkct5n9jn

LETS GOLF http://www.mediafire.com/?ehxs6cillg7xwsy

BROTHERS IN ARMS http://www.mediafire.com/?ka4a6ks4hy85jd9

MONOPOLY http://www.mediafire.com/?9rutuo1jg003imr

TETRIS http://www.mediafire.com/?5csdv50hjvcgzc9

EARTHWORM JIM http://www.mediafire.com/?i15u6i1g7cctbhh

SHREK KART http://www.mediafire.com/?s2brru5ak190mfn

ASPHALT 5 http://www.mediafire.com/?uabzpxd74hdwofz

HAWX http://www.mediafire.com/?g8vxfwkyknktif1

masalah game hawx tidak bisa dibuka
buka xterminal ketik :

root
apt-get install libgles1-sgx-img
apt-get install libsdl-net1.2

masalah game h.a.w.k tidak bisa save

sudo gainroot
cd /opt/preenv/usr/palm/applications/com.gameloft.app.hawx
chmod 777 hawx
chmod 777 hawx/data.bar
chmod 777 hawx/Settings
chmod 777 hawx/Profiles
chmod 777 hawx/Profile_0


DRIVER http://www.mediafire.com/?guwc32cyh99mnao

BRAIN CHALLENGE http://www.mediafire.com/?3buz46814bc1wv6

SIMS 3 http://www.mediafire.com/?r8vbi1a9ifo3iqo

OREGON TRAIL http://www.mediafire.com/?k30uarg7grbj1bi

GROUND EFFECT PRO http://www.mediafire.com/?2317x5735fjh11u

X-PLANE http://www.mediafire.com/?6l97fxqfcal9j7q

SETTLERS http://www.mediafire.com/?ohi22gf78hk2yd1

BLADES OF FURY http://www.mediafire.com/?s7qsjzz3mqdzc3n

Sabtu, 17 Desember 2011

CSSU Features Configuration


posted By Deny.winarto

CSSU Features Configuration ini gunanya memudahkan meng-enable and disable fitur2 CSSU (Community Seamless Software Update)

Syaratnya :

1. Tentu harus ada CSSU, cara installnya :
- Buka http://wiki.maemo.org/Community_SSU, klik ikon "Install Testing" di kanan atas
- App man akan terbuka dan bakal ada 2 (kalo g salah) kali instalasi.
- Begitu selesai, akan ada "Community SSU" di daftar aplikasi. (KALO BELUM ADA BERARTI INSTALASI DI APP MAN BELUM SELESAI). Buka dan tunggu, dia akan memulai proses instalasi
- App man akan terbuka lagi, pilih upgrade untuk Maemo 5 Community SSU. Rover bakal reboot.

2. Cari CSSU Features Configuration di app manager, (extras devel harus dienable terlebih dahulu) Install.



Cara pakenya cukup simpel, cukup ganti value dari fitur yg ingin dirubah, stelah itu tekan "update"

Blurless Desaturation : biar background keliatan teksnya (mungkin butuh reboot)


Bigger Task Switcher : bikin mulitasking jadi 1/2 kolom



Rotation on Axis : kalo dibikin "Z" muternya bisa lebih smoothhh
Forced app auto rotation : All apps > Biar semua aplikasi auto rotate, tp ga selalu berhasil



Zoom on press : bikin zoom in & zoom out sebentar kalo dienabled... kaya goyang2 gt

Kalo mau balikin tinggal tekan tulisan di atas dan "Restore Default"